PABX Panasonic JUAL dan BELI
System Capacity
Maximum Trunks
The KX-NS1000 supports the following number of trunks.
| Type |
KX-NS1000 Stand-alone System |
KX-NS1000 Stand-alone System with Legacy GW*1 |
KX-NS1000 One-look Networking |
KX-NS1000 One-look Networking with Legacy GW*1 |
|
Total Number of Trunks |
256 ch | 256 ch | 600 ch | 600 ch |
|---|---|---|---|---|
| H.323 | 96 ch | 96 ch | 128 ch | 128 ch |
| SIP | 256 ch | 256 ch | 256 ch | 256 ch |
| BRI | 8 ch | 256 ch | 128 ch | 600 ch |
| PRI23 | 23 ch | 230 ch | 368 ch | 600 ch |
| PRI30 | 30 ch | 256 ch | 480 ch | 600 ch |
| T1 | N/A | 240 ch | N/A | 600 ch |
| E1 | N/A | 256 ch | N/A | 600 ch |
| Analogue | 2 lines | 256 lines | 32 lines | 600 lines |
*1 The capacity varies depending on which cabinet is being used as the legacy GW.
Note: The capacity varies depending on the setting conditions. Contact your dealer for further information.
Maximum Terminal Equipment
The following shows the number of each terminal equipment type supported by the KX-NS1000.
| Type |
KX-NS1000 Stand-alone System |
KX-NS1000 Stand-alone System with Legacy GW*1 |
KX-NS1000 One-look Networking |
KX-NS1000 One-look Networking with Legacy GW*1 |
| Telephone | ||||
|---|---|---|---|---|
|
Total Number of Extensions |
640 | 640 | 1000 | 1000 |
| SLT | 2 | 480 | 32 | 1000 |
| DPT | N/A | 320 | N/A | 512 |
| APT | N/A | 160 | N/A | 336 |
| IP-PT*2 | 640 | 640 | 1000 | 1000 |
| SIP | 640 | 640 | 1000 | 1000 |
| SIP Phone*3 | 640 | 640 | 1000 | 1000 |
| KX-UDT Series | 255 | 255 | 255 | 255 |
| DSS Console | N/A | 64 | N/A | 64 |
| CS | 64 | 64 | 128 | 128 |
| DPT-CS (2ch) | N/A | 64 | N/A | 128 |
| DPT-CS (8ch) | N/A | 32 | N/A | 64 |
| IP-CS | 64 | 64 | 128 | 128 |
| SIP-CS | 64 | 64 | 128 | 128 |
| PS | 512 | 512 | 512 | 512 |
|
Voice Processing System (VPS) |
N/A | 4 | N/A | 8 |
| Doorphone | 1 | 33 | 8 | 64 |
| Door Opener | 1 | 33 | 8 | 64 |
| External Sensor | 1 | 33 | 8 | 64 |
*1 The capacity varies depending on which cabinet is being used as the legacy GW.
*2 KX-NT500 series, and KX-NT265 (software version 2.00 or later only).
*3 KX-UT Series, KX-NT700 and third party SIP phones (SIP hardphones/SIP softphones).
Note: The capacity varies depending on the setting conditions. Contact your dealer for further information.